Tag Archives: Fixes for t-shirts I wrecked by dropping food on my rack

Life’s a bleach and then you dye; project 24

Standard
Life’s a bleach and then you dye; project 24

I was feeling a bit rocky physically over the weekend (and still am), so my belated craft is a fairly simple one. I’ve been seeing some Pinterest pins on tie-“dyeing” with bleach, so I thought that would be a good choice for yet another shirt that had been rack-wrecked with an ill-placed drip of salad dressing. I’d been putting off doing this shirt, because it was pretty much brand new, and I love the color so much, and I didn’t want to do something that would render it completely unwearable.

I loved the way using rubber bands and little glass whats-its made such intricate medallion-like patterns on the silk scarves I dyed a while back, so I placed 5 around the V-neck in the front of the shirt. Following the gathers that made, I pinched the fabric in folds all the way down the front of the shirt, from the center on out. I had a couple of binder clips at hand, so I fastened them that way, just in a couple of spots.

I thought it would be cool to leave the back unbleached, so I put some bubble-wrap between the front and the back. (When I’m painting or using a bleach pen, I usually use a cereal box, but I was afraid some of the color would leach from the box onto the shirt with this one, so I went with the bubble wrap).

Here it is ready to dip into the bleach solution:

I really need to clear an actual crafting surface to work on. Really.

The bleaching directions I got from this DIY project (found via Pinterest): http://honestlywtf.com/diy/diy-bleach-tie-dye/ (And boy, do I want to do a shirt like the one done here!)

And my advice if you use this method to do a shirt, pay attention to her suggestions about working outdoors and gloves. I was Miss Half-Ass-It, and it wasn’t that pleasant. And the fumes could be seriously not good — I used the exhaust fan in my bathroom as I worked, but it still was headachy.

The two things I think I’d do differently (besides working outdoors and wearing gloves): use a bigger vessel for the solution and clip the pleats all the way along their length. As for the first, I used the bathroom sink, a smallish oval, so I had to keep moving the shirt back and forth to be sure everything got in the bleach. When I checked for color, the back hem got into the bleach too, so I didn’t end up with the full unbleached effect on the back. This shirt was dip-and-check-dip-and-check, rather than the 30-minute resting period of the bleach pen. I couldn’t say exactly how long it was in the bleach solution, but barely over a minute or two. I rinsed it, pulled out the clips and glass bits, then ran it through the wash.

Here’s the front, once dried:

Bleach tie-dye

I’m a little disappointed by the medallions, which are just kind of quavery little rounded boxes. They may need some sort of embellishment. The resist effect only was clear where I had the clips in. I’d do it all the way down another time, but I still think this came out okay.

Jury’s still out on whether I feel there should be more embellishment of some kind on the front.

And here’s the back:

Looks cool, especially close up, but someone walking behind me down the hall at work yesterday thought I’d fallen into a puddle or something.

I learned a few things from this, and got a wearable shirt out of the deal, so it’s pretty much a success.

Advertisements

Don’t worry, it’s only a nip

Standard
Don’t worry, it’s only a nip

Wednesday night I made another “bleach-paint” tee on another shirt with an unfortunate rack/grease spot OTP, this time using a stencil, and I really like the design I ended up with. It will surprise no one who’s been reading along so far that it didn’t come out perfectly. I was very careful to peel off the stencil carefully, but I still got some marks on the shirt, which don’t look it in the pictures, but came out looking kind of gray.

A little bit of bleed, so this is probably as fiddly a design as I’d be able to do with a bleach pen, but I like it and don’t mind the bleed. There are the grayish streaks, too, so next time I’d probably scrape off the bleach before removing the stencil.

The stencil, by the way, was made with two smaller stencils I got in a pack at Walmart, with lots of fleur-de-lis variations and other swirly bits, plus simpler shapes like the circle. I traced them onto white removable Contact Paper, then flopped the swirly design on the other side of the circle.

Like so.

I don’t have pictures of every step, since I did the Contact Paper bits at my art group gathering Wednesday night. Like I said, the design was a little fiddly, tough to cut out perfectly, but I don’t think it really made a difference with the bleach bleed anyway. But here it is with the bleach on.

Slightly different color results from the previous brown shirt I did, but that could be the smidge of spandex content in this tee.

Love it, totally planned to wear it to work the next day, but when I put it on … well, the combination of the circles, the placement, and the flesh* color (*flesh color according to the adhesive strip bandage industry, at any rate) made it seem just a little … nipply.

See? Or is it just me?

I decided making it not flesh* color in some way would probably decrease that effect, or my neurosis about it anyway. I considered a tie-dye look craft I’d seen done with Sharpies and rubbing alcohol, but the attempt I made on a test piece (I KNOW!! For once I used a TEST PIECE!) wasn’t awesome, so I decided not to go for that.

TEST PIECE! Who would have thought?

So I decided on the lace-spraypaint technique and just plowed ahead with it. I think that solves the prob, or maybe I’ve just stopped being neurotic about it. I thought I’d do something to mask the gray spots, so I moved the lace piece to different spots along the front and spray painted here and there. I ended up with some spots that were spray paint blobs, but I decided (once again) that I really don’t mind that. I have a printed tee I got at Maurice that looks like I rolled around on the floor of a wine bar or something, so it’s not a deal-breaker.

So here’s the final result!

I’m very pleased, all in all.

And a close-up.

Can’t wait to wear it!

“MY GOD, IT’S FULL OF STARS”

Standard
“MY GOD, IT’S FULL OF STARS”

By the time this year is more than halfway through, I suspect the most-used tag will be Fixes for t-shirts I wrecked by dropping food on my rack.

This is the first. Though it was originally kinda ruined when I got bleach spots on the hip. How that occurred I can’t even tell you, since I don’t use bleach in my laundry. It’s a mystery. I was wearing it anyway under a cardigan, but then I dropped something on my rack (it’s always salad dressing or something that won’t quietly disappear in the wash — someone needs to write a scientific paper on the attraction of oily foods to the sizable rack).

So I found a tutorial through Pinterest where that begins with you spritzing bleach all over a black cotton tee, so it seemed like a natural. Plus, it looks really amazing.

You can find the tutorial here:

http://treasuresandtravels.squarespace.com/blog/2012/2/21/diy-galaxy-tee.html

So here’s the shirt I started out with — a nice basic tee that I wasn’t nearly ready to part with yet. Except — crap! Grease stain!

Out, damned spot!

I sprayed the shirt with bleach, and then promptly tossed it in the washer. But here it is, post-spritz.

I love the fine spray of reddish color here.

I dotted around several colors: smudges of matte gray and some iridescent blue and red, using my Shiva oil paint sticks.

Point down, and a little twist of the wrist

Then I smeared around some white glitter paint throughout. The original tutorial used white paint and glitter separately, but I went with what I could find at the megalomart on the way home from work, which has a good fabric section and a crappier crafts section. I wore this once, then decided it needed more glitter. Though I wore it again, I suspect I’ll add some spots of paint by thumb-flicking paint-loaded bristles, rather than flicking the whole brush a la Pollock.

But here is its current form:

Pretty slick, huh?

Though I’m very nervous about it, I’m wanting to try this on a canvas tote, with some handwritten text in a resist medium before I bleach. I think it would make a very cool item for the Wiscon art show — which, HEY, I GOT ACCEPTED!!!